DITL_4000_Register 2.txt
Items: (6 entries)
  0:
    Bounds: x1=305, y1=185, x2=395, y2=205
    Type: 4
    Info: 'Enter code...'
  1:
    Bounds: x1=24, y1=185, x2=114, y2=205
    Type: 4
    Info: 'Not Yet'
  2:
    Bounds: x1=21, y1=9, x2=396, y2=62
    Type: -120
    Info: 'Please note that the Reverse Engineering (CodeRetriever) function is neither a free product nor a part of the ObjectPlant license.'
  3:
    Bounds: x1=21, y1=66, x2=397, y2=130
    Type: -120
    Info: 'CodeRetriever is distributed as shareware.  You are permitted to use it on a trial basis for up to 30 days.  If you wish to continue using the product beyond that period, you are expected to pay a registration fee.'
  4:
    Bounds: x1=21, y1=139, x2=398, y2=172
    Type: -120
    Info: 'Click on ÒEnter Code...Ó to enter your license code for CodeRetriever.'
  5:
    Bounds: x1=299, y1=179, x2=401, y2=211
    Type: -128
    Info: ''

DITL_3001_License Code.txt
Items: (10 entries)
  0:
    Bounds: x1=258, y1=90, x2=318, y2=110
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=178, y1=90, x2=238, y2=110
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=252, y1=82, x2=324, y2=118
    Type: -128
    Info: ''
  3:
    Bounds: x1=12, y1=6, x2=324, y2=23
    Type: -120
    Info: 'Please enter your name and the license code:'
  4:
    Bounds: x1=132, y1=35, x2=288, y2=51
    Type: 16
    Info: ''
  5:
    Bounds: x1=132, y1=61, x2=288, y2=77
    Type: 16
    Info: ''
  6:
    Bounds: x1=23, y1=35, x2=128, y2=51
    Type: -120
    Info: 'Licensee name:'
  7:
    Bounds: x1=35, y1=61, x2=128, y2=77
    Type: -120
    Info: 'License Code:'
  8:
    Bounds: x1=21, y1=92, x2=160, y2=108
    Type: -120
    Info: '*** Invalid code ***'
  9:
    Bounds: x1=21, y1=92, x2=171, y2=108
    Type: -120
    Info: '*** Code accepted ***'

DITL_3000_Register.txt
Items: (8 entries)
  0:
    Bounds: x1=305, y1=257, x2=395, y2=277
    Type: 4
    Info: 'Enter code...'
  1:
    Bounds: x1=24, y1=257, x2=114, y2=277
    Type: 4
    Info: 'Not Yet'
  2:
    Bounds: x1=21, y1=13, x2=396, y2=29
    Type: -120
    Info: 'Please note that ObjectPlant is not a free product.'
  3:
    Bounds: x1=21, y1=44, x2=397, y2=92
    Type: -120
    Info: 'This product is distributed as shareware.  You are permitted to use it on a trial basis for up to 30 days.  If you wish to continue using the product beyond that'
  4:
    Bounds: x1=21, y1=92, x2=396, y2=124
    Type: -120
    Info: 'period, you are expected to pay a registration fee to obtain a license to use ObjectPlant.'
  5:
    Bounds: x1=21, y1=131, x2=398, y2=212
    Type: -120
    Info: 'Use the Register program to create a register form which then shall be sent to Kagi handling registrations. After registering you will get a license code removing the shareware notices and personalizing your copy of ObjectPlant.'
  6:
    Bounds: x1=21, y1=215, x2=398, y2=248
    Type: -120
    Info: 'Click on ÒEnter Code...Ó to enter your license code for ObjectPlant.'
  7:
    Bounds: x1=299, y1=251, x2=401, y2=283
    Type: -128
    Info: ''

DITL_2001_Generate at dialog.txt
Items: (13 entries)
  0:
    Bounds: x1=256, y1=157, x2=336, y2=175
    Type: 4
    Info: 'Open'
  1:
    Bounds: x1=59, y1=1152, x2=77, y2=1232
    Type: 4
    Info: ''
  2:
    Bounds: x1=256, y1=182, x2=336, y2=200
    Type: 4
    Info: 'Cancel'
  3:
    Bounds: x1=252, y1=58, x2=347, y2=78
    Type: -128
    Info: ''
  4:
    Bounds: x1=256, y1=87, x2=336, y2=105
    Type: 4
    Info: 'Eject'
  5:
    Bounds: x1=256, y1=112, x2=336, y2=130
    Type: 4
    Info: 'Desktop'
  6:
    Bounds: x1=12, y1=58, x2=230, y2=199
    Type: 0
    Info: ''
  7:
    Bounds: x1=49, y1=31, x2=192, y2=51
    Type: 0
    Info: ''
  8:
    Bounds: x1=252, y1=143, x2=340, y2=144
    Type: -128
    Info: ''
  9:
    Bounds: x1=268, y1=1191, x2=343, y2=1207
    Type: -120
    Info: 'Static Text'
  10:
    Bounds: x1=12, y1=230, x2=230, y2=246
    Type: 0
    Info: ''
  11:
    Bounds: x1=12, y1=202, x2=230, y2=222
    Type: 4
    Info: 'Select'
  12:
    Bounds: x1=16, y1=6, x2=277, y2=25
    Type: -120
    Info: 'Select a folder for the generated code:'

DITL_2000_Export as dialog.txt
Items: (17 entries)
  0:
    Bounds: x1=219, y1=136, x2=289, y2=154
    Type: 4
    Info: 'Save'
  1:
    Bounds: x1=219, y1=162, x2=289, y2=180
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=14, y1=139, x2=186, y2=155
    Type: -120
    Info: 'Export as:'
  3:
    Bounds: x1=199, y1=29, x2=303, y2=49
    Type: 0
    Info: ''
  4:
    Bounds: x1=219, y1=60, x2=289, y2=78
    Type: 4
    Info: 'Eject'
  5:
    Bounds: x1=219, y1=86, x2=289, y2=104
    Type: 4
    Info: 'Drive'
  6:
    Bounds: x1=16, y1=161, x2=184, y2=177
    Type: 16
    Info: ''
  7:
    Bounds: x1=14, y1=29, x2=197, y2=127
    Type: 0
    Info: ''
  8:
    Bounds: x1=10, y1=210, x2=107, y2=230
    Type: 6
    Info: 'PICT File'
  9:
    Bounds: x1=10, y1=229, x2=107, y2=249
    Type: 6
    Info: 'EPS'
  10:
    Bounds: x1=10, y1=193, x2=85, y2=209
    Type: 8
    Info: 'Format:'
  11:
    Bounds: x1=136, y1=193, x2=228, y2=209
    Type: 8
    Info: 'Picture size:'
  12:
    Bounds: x1=136, y1=210, x2=243, y2=230
    Type: 6
    Info: 'Window size'
  13:
    Bounds: x1=136, y1=229, x2=233, y2=249
    Type: 6
    Info: 'Best fit'
  14:
    Bounds: x1=9, y1=187, x2=296, y2=189
    Type: 0
    Info: ''
  15:
    Bounds: x1=137, y1=208, x2=222, y2=209
    Type: 0
    Info: ''
  16:
    Bounds: x1=10, y1=208, x2=65, y2=209
    Type: 0
    Info: ''

DITL_1234_Find model file.txt
Items: (9 entries)
  0:
    Bounds: x1=252, y1=157, x2=332, y2=177
    Type: 4
    Info: 'Open'
  1:
    Bounds: x1=252, y1=126, x2=332, y2=146
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=13, y1=4, x2=227, y2=20
    Type: -120
    Info: 'Find the model file (.mdl)'
  3:
    Bounds: x1=235, y1=30, x2=337, y2=46
    Type: 0
    Info: ''
  4:
    Bounds: x1=252, y1=54, x2=332, y2=74
    Type: 4
    Info: 'Eject'
  5:
    Bounds: x1=252, y1=82, x2=332, y2=102
    Type: 4
    Info: 'Desktop'
  6:
    Bounds: x1=12, y1=51, x2=230, y2=181
    Type: 0
    Info: ''
  7:
    Bounds: x1=12, y1=28, x2=230, y2=47
    Type: 0
    Info: ''
  8:
    Bounds: x1=251, y1=113, x2=333, y2=114
    Type: -64
    Info: ' '

DITL_1028_Add Identifier to ignore.txt
Items: (5 entries)
  0:
    Bounds: x1=187, y1=85, x2=237, y2=105
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=15, y1=85, x2=65, y2=105
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=14, y1=28, x2=90, y2=44
    Type: -120
    Info: 'Identifier:'
  3:
    Bounds: x1=93, y1=28, x2=235, y2=44
    Type: 16
    Info: ''
  4:
    Bounds: x1=181, y1=77, x2=243, y2=113
    Type: -128
    Info: ''

DITL_1027_Exception Data.txt
Items: (7 entries)
  0:
    Bounds: x1=230, y1=130, x2=280, y2=150
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=15, y1=130, x2=65, y2=150
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=14, y1=10, x2=59, y2=29
    Type: 8
    Info: 'Name:'
  3:
    Bounds: x1=100, y1=12, x2=249, y2=28
    Type: 16
    Info: ''
  4:
    Bounds: x1=224, y1=122, x2=286, y2=158
    Type: -128
    Info: ''
  5:
    Bounds: x1=15, y1=55, x2=281, y2=116
    Type: 16
    Info: ''
  6:
    Bounds: x1=12, y1=33, x2=110, y2=50
    Type: -120
    Info: 'Description:'

DITL_1026_C++ parsing progress.txt
Items: (9 entries)
  0:
    Bounds: x1=360, y1=267, x2=418, y2=287
    Type: -124
    Info: 'Button'
  1:
    Bounds: x1=280, y1=83, x2=338, y2=103
    Type: 4
    Info: 'Abort'
  2:
    Bounds: x1=388, y1=291, x2=420, y2=323
    Type: -128
    Info: ''
  3:
    Bounds: x1=73, y1=88, x2=265, y2=100
    Type: 0
    Info: ''
  4:
    Bounds: x1=84, y1=64, x2=330, y2=80
    Type: -120
    Info: ''
  5:
    Bounds: x1=58, y1=24, x2=329, y2=40
    Type: -120
    Info: ''
  6:
    Bounds: x1=13, y1=63, x2=85, y2=79
    Type: -120
    Info: ''
  7:
    Bounds: x1=15, y1=24, x2=59, y2=40
    Type: -120
    Info: 'File:'
  8:
    Bounds: x1=7, y1=11, x2=345, y2=113
    Type: 0
    Info: ''

DITL_1025_Preferences Use Case.txt
Items: (3 entries)
  0:
    Bounds: x1=87, y1=11, x2=297, y2=30
    Type: 7
    Info: ','
  1:
    Bounds: x1=306, y1=11, x2=396, y2=31
    Type: 4
    Info: 'Delete Set'
  2:
    Bounds: x1=87, y1=58, x2=185, y2=74
    Type: 5
    Info: 'show notes'

DITL_1024_Preferences Event Trace.txt
Items: (6 entries)
  0:
    Bounds: x1=87, y1=11, x2=297, y2=30
    Type: 7
    Info: ','
  1:
    Bounds: x1=306, y1=11, x2=396, y2=31
    Type: 4
    Info: 'Delete Set'
  2:
    Bounds: x1=88, y1=80, x2=178, y2=96
    Type: -120
    Info: 'Event names:'
  3:
    Bounds: x1=88, y1=97, x2=166, y2=115
    Type: 6
    Info: 'all'
  4:
    Bounds: x1=88, y1=114, x2=166, y2=132
    Type: 6
    Info: 'none'
  5:
    Bounds: x1=87, y1=58, x2=185, y2=74
    Type: 5
    Info: 'show notes'

DITL_1023_Preferences State Diagram.txt
Items: (15 entries)
  0:
    Bounds: x1=87, y1=170, x2=178, y2=186
    Type: -120
    Info: 'Event extras:'
  1:
    Bounds: x1=87, y1=187, x2=165, y2=205
    Type: 6
    Info: 'all'
  2:
    Bounds: x1=87, y1=204, x2=165, y2=222
    Type: 6
    Info: 'selected'
  3:
    Bounds: x1=87, y1=221, x2=165, y2=239
    Type: 6
    Info: 'none'
  4:
    Bounds: x1=87, y1=96, x2=171, y2=112
    Type: -120
    Info: 'Entry & Exit:'
  5:
    Bounds: x1=87, y1=113, x2=165, y2=131
    Type: 6
    Info: 'all'
  6:
    Bounds: x1=87, y1=130, x2=165, y2=148
    Type: 6
    Info: 'selected'
  7:
    Bounds: x1=87, y1=147, x2=165, y2=165
    Type: 6
    Info: 'none'
  8:
    Bounds: x1=181, y1=96, x2=269, y2=112
    Type: -120
    Info: 'Do activities:'
  9:
    Bounds: x1=181, y1=113, x2=259, y2=131
    Type: 6
    Info: 'all'
  10:
    Bounds: x1=181, y1=130, x2=259, y2=148
    Type: 6
    Info: 'selected'
  11:
    Bounds: x1=181, y1=147, x2=259, y2=165
    Type: 6
    Info: 'none'
  12:
    Bounds: x1=87, y1=74, x2=248, y2=90
    Type: 5
    Info: 'show notes'
  13:
    Bounds: x1=87, y1=11, x2=297, y2=30
    Type: 7
    Info: ','
  14:
    Bounds: x1=306, y1=11, x2=396, y2=31
    Type: 4
    Info: 'Delete Set'

DITL_1022_Preferences Object Model.txt
Items: (45 entries)
  0:
    Bounds: x1=87, y1=36, x2=248, y2=52
    Type: 5
    Info: 'attribute type'
  1:
    Bounds: x1=87, y1=51, x2=248, y2=67
    Type: 5
    Info: 'operation arguments'
  2:
    Bounds: x1=87, y1=66, x2=248, y2=82
    Type: 5
    Info: 'operation return type'
  3:
    Bounds: x1=266, y1=66, x2=427, y2=82
    Type: 5
    Info: 'show notes'
  4:
    Bounds: x1=86, y1=101, x2=164, y2=117
    Type: -120
    Info: 'Attributes:'
  5:
    Bounds: x1=86, y1=118, x2=164, y2=136
    Type: 6
    Info: 'all'
  6:
    Bounds: x1=86, y1=135, x2=164, y2=153
    Type: 6
    Info: 'selected'
  7:
    Bounds: x1=86, y1=152, x2=164, y2=170
    Type: 6
    Info: 'none'
  8:
    Bounds: x1=172, y1=101, x2=250, y2=117
    Type: -120
    Info: 'Operations:'
  9:
    Bounds: x1=172, y1=118, x2=250, y2=136
    Type: 6
    Info: 'all'
  10:
    Bounds: x1=172, y1=135, x2=250, y2=153
    Type: 6
    Info: 'selected'
  11:
    Bounds: x1=172, y1=152, x2=250, y2=170
    Type: 6
    Info: 'none'
  12:
    Bounds: x1=258, y1=101, x2=306, y2=117
    Type: -120
    Info: 'Roles:'
  13:
    Bounds: x1=258, y1=118, x2=336, y2=136
    Type: 6
    Info: 'all'
  14:
    Bounds: x1=258, y1=135, x2=336, y2=153
    Type: 6
    Info: 'selected'
  15:
    Bounds: x1=258, y1=152, x2=336, y2=170
    Type: 6
    Info: 'none'
  16:
    Bounds: x1=344, y1=101, x2=414, y2=117
    Type: -120
    Info: 'Qualifiers:'
  17:
    Bounds: x1=344, y1=118, x2=422, y2=136
    Type: 6
    Info: 'all'
  18:
    Bounds: x1=344, y1=135, x2=422, y2=153
    Type: 6
    Info: 'selected'
  19:
    Bounds: x1=344, y1=152, x2=422, y2=170
    Type: 6
    Info: 'none'
  20:
    Bounds: x1=386, y1=206, x2=420, y2=234
    Type: 0
    Info: ''
  21:
    Bounds: x1=87, y1=81, x2=248, y2=97
    Type: 5
    Info: 'visibility'
  22:
    Bounds: x1=266, y1=81, x2=427, y2=97
    Type: 5
    Info: 'static'
  23:
    Bounds: x1=86, y1=11, x2=296, y2=30
    Type: 7
    Info: ','
  24:
    Bounds: x1=311, y1=10, x2=401, y2=30
    Type: 4
    Info: 'Delete Set'
  25:
    Bounds: x1=266, y1=36, x2=427, y2=52
    Type: 5
    Info: 'final'
  26:
    Bounds: x1=266, y1=51, x2=427, y2=67
    Type: 5
    Info: 'initial value'
  27:
    Bounds: x1=98, y1=300, x2=162, y2=318
    Type: 5
    Info: 'show'
  28:
    Bounds: x1=98, y1=281, x2=128, y2=299
    Type: 6
    Info: '+'
  29:
    Bounds: x1=130, y1=281, x2=160, y2=299
    Type: 6
    Info: '#'
  30:
    Bounds: x1=162, y1=281, x2=192, y2=299
    Type: 6
    Info: '-'
  31:
    Bounds: x1=194, y1=281, x2=249, y2=299
    Type: 6
    Info: 'None'
  32:
    Bounds: x1=87, y1=261, x2=194, y2=277
    Type: -120
    Info: 'New attributes'
  33:
    Bounds: x1=275, y1=300, x2=339, y2=318
    Type: 5
    Info: 'show'
  34:
    Bounds: x1=275, y1=281, x2=305, y2=299
    Type: 6
    Info: '+'
  35:
    Bounds: x1=307, y1=281, x2=337, y2=299
    Type: 6
    Info: '#'
  36:
    Bounds: x1=339, y1=281, x2=369, y2=299
    Type: 6
    Info: '-'
  37:
    Bounds: x1=371, y1=281, x2=426, y2=299
    Type: 6
    Info: 'None'
  38:
    Bounds: x1=264, y1=261, x2=371, y2=277
    Type: -120
    Info: 'New operations'
  39:
    Bounds: x1=77, y1=247, x2=429, y2=325
    Type: -128
    Info: ''
  40:
    Bounds: x1=86, y1=240, x2=196, y2=256
    Type: -120
    Info: 'Default values:'
  41:
    Bounds: x1=87, y1=171, x2=417, y2=187
    Type: -120
    Info: 'Reference class attributes/operations:'
  42:
    Bounds: x1=87, y1=188, x2=165, y2=206
    Type: 6
    Info: 'all'
  43:
    Bounds: x1=87, y1=205, x2=165, y2=223
    Type: 6
    Info: 'selected'
  44:
    Bounds: x1=87, y1=222, x2=165, y2=240
    Type: 6
    Info: 'none'

DITL_1021_Preferences Code Gen.txt
Items: (18 entries)
  0:
    Bounds: x1=92, y1=88, x2=289, y2=143
    Type: -128
    Info: ''
  1:
    Bounds: x1=295, y1=98, x2=355, y2=118
    Type: 4
    Info: 'Select...'
  2:
    Bounds: x1=188, y1=148, x2=263, y2=164
    Type: 16
    Info: ''
  3:
    Bounds: x1=80, y1=148, x2=185, y2=164
    Type: -120
    Info: 'Start comment:'
  4:
    Bounds: x1=188, y1=170, x2=263, y2=186
    Type: 16
    Info: ''
  5:
    Bounds: x1=80, y1=170, x2=185, y2=186
    Type: -120
    Info: 'Stop comment:'
  6:
    Bounds: x1=346, y1=288, x2=412, y2=305
    Type: 0
    Info: ''
  7:
    Bounds: x1=205, y1=278, x2=342, y2=296
    Type: 0
    Info: ''
  8:
    Bounds: x1=273, y1=288, x2=339, y2=305
    Type: 0
    Info: ''
  9:
    Bounds: x1=86, y1=248, x2=421, y2=266
    Type: 6
    Info: 'Create package based on namespaces (C++ only)'
  10:
    Bounds: x1=86, y1=231, x2=381, y2=249
    Type: 6
    Info: 'Create package for each folder (C++ only)'
  11:
    Bounds: x1=77, y1=78, x2=429, y2=193
    Type: -128
    Info: ''
  12:
    Bounds: x1=86, y1=71, x2=204, y2=87
    Type: -120
    Info: 'Code generation:'
  13:
    Bounds: x1=86, y1=289, x2=192, y2=307
    Type: 6
    Info: 'C++'
  14:
    Bounds: x1=86, y1=272, x2=192, y2=290
    Type: 6
    Info: 'Java'
  15:
    Bounds: x1=77, y1=220, x2=429, y2=310
    Type: -128
    Info: ''
  16:
    Bounds: x1=86, y1=213, x2=180, y2=229
    Type: -120
    Info: 'Import code:'
  17:
    Bounds: x1=77, y1=4, x2=429, y2=70
    Type: -120
    Info: 'Note: these settings are only used when creating new documents. To change the settings for an existing document use Document Preferences in the File menu.'

DITL_1020_Preferences General.txt
Items: (33 entries)
  0:
    Bounds: x1=94, y1=21, x2=249, y2=37
    Type: 5
    Info: 'Keep selected tool'
  1:
    Bounds: x1=93, y1=292, x2=388, y2=308
    Type: 5
    Info: 'Include empty attribute compartment'
  2:
    Bounds: x1=94, y1=66, x2=298, y2=82
    Type: 5
    Info: 'Open info window on create'
  3:
    Bounds: x1=94, y1=132, x2=199, y2=148
    Type: -120
    Info: 'Select squares:'
  4:
    Bounds: x1=209, y1=129, x2=214, y2=134
    Type: -64
    Info: ' È'
  5:
    Bounds: x1=227, y1=123, x2=245, y2=141
    Type: 6
    Info: ''
  6:
    Bounds: x1=227, y1=141, x2=245, y2=159
    Type: 6
    Info: ''
  7:
    Bounds: x1=209, y1=147, x2=214, y2=152
    Type: -64
    Info: ' É'
  8:
    Bounds: x1=94, y1=36, x2=247, y2=52
    Type: 5
    Info: 'Move without delay'
  9:
    Bounds: x1=93, y1=232, x2=197, y2=249
    Type: 6
    Info: 'OMT'
  10:
    Bounds: x1=93, y1=248, x2=197, y2=265
    Type: 6
    Info: 'UML'
  11:
    Bounds: x1=87, y1=224, x2=227, y2=273
    Type: -128
    Info: ''
  12:
    Bounds: x1=97, y1=217, x2=212, y2=233
    Type: -120
    Info: 'Default Notation:'
  13:
    Bounds: x1=93, y1=307, x2=346, y2=323
    Type: 5
    Info: 'Include IDL data for arguments'
  14:
    Bounds: x1=87, y1=284, x2=427, y2=326
    Type: -128
    Info: ''
  15:
    Bounds: x1=252, y1=21, x2=375, y2=37
    Type: 5
    Info: 'Snap to grid'
  16:
    Bounds: x1=252, y1=37, x2=427, y2=53
    Type: 5
    Info: 'Show page boundaries'
  17:
    Bounds: x1=97, y1=277, x2=190, y2=293
    Type: -120
    Info: 'Object Model:'
  18:
    Bounds: x1=94, y1=165, x2=308, y2=183
    Type: 5
    Info: 'Always use System font'
  19:
    Bounds: x1=273, y1=232, x2=418, y2=249
    Type: 5
    Info: 'Sort popupmenu'
  20:
    Bounds: x1=273, y1=248, x2=418, y2=265
    Type: 5
    Info: 'Include classes'
  21:
    Bounds: x1=267, y1=224, x2=427, y2=273
    Type: -128
    Info: ''
  22:
    Bounds: x1=277, y1=217, x2=417, y2=233
    Type: -120
    Info: 'Data Type menus:'
  23:
    Bounds: x1=322, y1=122, x2=336, y2=138
    Type: -64
    Info: ' ´'
  24:
    Bounds: x1=342, y1=123, x2=360, y2=141
    Type: 6
    Info: ''
  25:
    Bounds: x1=342, y1=141, x2=360, y2=159
    Type: 6
    Info: ''
  26:
    Bounds: x1=322, y1=144, x2=336, y2=160
    Type: -64
    Info: ' µ'
  27:
    Bounds: x1=94, y1=115, x2=169, y2=131
    Type: -120
    Info: 'Sizes:'
  28:
    Bounds: x1=252, y1=132, x2=310, y2=148
    Type: -120
    Info: 'Arrows:'
  29:
    Bounds: x1=94, y1=51, x2=249, y2=67
    Type: 5
    Info: 'Rectilinear lines'
  30:
    Bounds: x1=94, y1=88, x2=289, y2=106
    Type: 8
    Info: ''
  31:
    Bounds: x1=87, y1=11, x2=427, y2=213
    Type: -128
    Info: ''
  32:
    Bounds: x1=96, y1=4, x2=154, y2=20
    Type: -120
    Info: 'General:'

DITL_1019_Preferences.txt
Items: (5 entries)
  0:
    Bounds: x1=339, y1=332, x2=409, y2=352
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=228, y1=332, x2=298, y2=352
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=9, y1=9, x2=69, y2=357
    Type: -128
    Info: ''
  3:
    Bounds: x1=80, y1=10, x2=81, y2=304
    Type: 0
    Info: ''
  4:
    Bounds: x1=333, y1=324, x2=415, y2=360
    Type: -128
    Info: ''

DITL_1018_Document info general.txt
Items: (23 entries)
  0:
    Bounds: x1=421, y1=305, x2=471, y2=325
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=23, y1=305, x2=73, y2=325
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=24, y1=30, x2=79, y2=47
    Type: 6
    Info: 'OMT'
  3:
    Bounds: x1=24, y1=46, x2=79, y2=64
    Type: 6
    Info: 'UML'
  4:
    Bounds: x1=15, y1=21, x2=150, y2=69
    Type: -128
    Info: ''
  5:
    Bounds: x1=24, y1=13, x2=90, y2=29
    Type: -120
    Info: 'Notation:'
  6:
    Bounds: x1=415, y1=297, x2=477, y2=333
    Type: -128
    Info: ''
  7:
    Bounds: x1=262, y1=103, x2=336, y2=121
    Type: 6
    Info: 'Java'
  8:
    Bounds: x1=262, y1=120, x2=336, y2=138
    Type: 6
    Info: 'C++'
  9:
    Bounds: x1=262, y1=174, x2=468, y2=244
    Type: 0
    Info: ''
  10:
    Bounds: x1=30, y1=104, x2=227, y2=184
    Type: -128
    Info: ''
  11:
    Bounds: x1=30, y1=194, x2=130, y2=214
    Type: 4
    Info: 'Select files...'
  12:
    Bounds: x1=137, y1=233, x2=212, y2=249
    Type: 16
    Info: ''
  13:
    Bounds: x1=29, y1=233, x2=134, y2=249
    Type: -120
    Info: 'Start comment:'
  14:
    Bounds: x1=137, y1=255, x2=212, y2=271
    Type: 16
    Info: ''
  15:
    Bounds: x1=29, y1=255, x2=134, y2=271
    Type: -120
    Info: 'Stop comment:'
  16:
    Bounds: x1=15, y1=94, x2=243, y2=284
    Type: -128
    Info: ''
  17:
    Bounds: x1=24, y1=87, x2=142, y2=103
    Type: -120
    Info: 'Code generation:'
  18:
    Bounds: x1=262, y1=152, x2=417, y2=168
    Type: -120
    Info: 'Identifiers to ignore:'
  19:
    Bounds: x1=263, y1=252, x2=321, y2=272
    Type: 4
    Info: 'Add...'
  20:
    Bounds: x1=410, y1=252, x2=468, y2=272
    Type: 4
    Info: 'Remove'
  21:
    Bounds: x1=253, y1=94, x2=479, y2=284
    Type: -128
    Info: ''
  22:
    Bounds: x1=262, y1=86, x2=377, y2=102
    Type: -120
    Info: 'Import code:'

DITL_1017_Ref Interface dialog.txt
Items: (3 entries)
  0:
    Bounds: x1=304, y1=85, x2=354, y2=105
    Type: 7
    Info: ' …'
  1:
    Bounds: x1=15, y1=85, x2=65, y2=105
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=12, y1=10, x2=222, y2=29
    Type: 7
    Info: '0'

DITL_1016_Ref Class dialog.txt
Items: (4 entries)
  0:
    Bounds: x1=304, y1=85, x2=354, y2=105
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=15, y1=85, x2=65, y2=105
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=12, y1=10, x2=322, y2=29
    Type: 7
    Info: '0'
  3:
    Bounds: x1=298, y1=77, x2=360, y2=113
    Type: -128
    Info: ''

DITL_1015_Code generation progress.txt
Items: (9 entries)
  0:
    Bounds: x1=360, y1=267, x2=418, y2=287
    Type: -124
    Info: 'Button'
  1:
    Bounds: x1=280, y1=83, x2=338, y2=103
    Type: 4
    Info: 'Abort'
  2:
    Bounds: x1=388, y1=291, x2=420, y2=323
    Type: -128
    Info: ''
  3:
    Bounds: x1=73, y1=87, x2=265, y2=99
    Type: 0
    Info: ''
  4:
    Bounds: x1=86, y1=25, x2=332, y2=41
    Type: -120
    Info: ''
  5:
    Bounds: x1=86, y1=48, x2=326, y2=64
    Type: -120
    Info: ''
  6:
    Bounds: x1=15, y1=24, x2=87, y2=40
    Type: -120
    Info: 'Template:'
  7:
    Bounds: x1=41, y1=48, x2=85, y2=64
    Type: -120
    Info: 'Class:'
  8:
    Bounds: x1=7, y1=11, x2=345, y2=113
    Type: 0
    Info: ''

DITL_1014_Parameter Data.txt
Items: (12 entries)
  0:
    Bounds: x1=230, y1=201, x2=280, y2=221
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=15, y1=201, x2=65, y2=221
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=14, y1=34, x2=58, y2=50
    Type: -120
    Info: 'Name: '
  3:
    Bounds: x1=100, y1=34, x2=283, y2=50
    Type: 16
    Info: ''
  4:
    Bounds: x1=14, y1=10, x2=59, y2=29
    Type: 8
    Info: 'Type:'
  5:
    Bounds: x1=10, y1=79, x2=240, y2=98
    Type: -121
    Info: '1'
  6:
    Bounds: x1=100, y1=12, x2=249, y2=28
    Type: 16
    Info: ''
  7:
    Bounds: x1=224, y1=193, x2=286, y2=229
    Type: -128
    Info: ''
  8:
    Bounds: x1=14, y1=56, x2=94, y2=72
    Type: -120
    Info: 'Default value: '
  9:
    Bounds: x1=100, y1=56, x2=283, y2=72
    Type: 16
    Info: ''
  10:
    Bounds: x1=12, y1=102, x2=110, y2=119
    Type: -120
    Info: 'Description:'
  11:
    Bounds: x1=15, y1=124, x2=281, y2=185
    Type: 16
    Info: ''

DITL_1009_New View Set.txt
Items: (6 entries)
  0:
    Bounds: x1=304, y1=85, x2=354, y2=105
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=15, y1=85, x2=65, y2=105
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=16, y1=45, x2=135, y2=61
    Type: -120
    Info: 'Name of new set: '
  3:
    Bounds: x1=138, y1=45, x2=355, y2=61
    Type: 16
    Info: ''
  4:
    Bounds: x1=12, y1=10, x2=222, y2=29
    Type: 7
    Info: '-'
  5:
    Bounds: x1=298, y1=77, x2=360, y2=113
    Type: -128
    Info: ''

DITL_1007_Add DataType.txt
Items: (5 entries)
  0:
    Bounds: x1=187, y1=85, x2=237, y2=105
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=15, y1=85, x2=65, y2=105
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=14, y1=28, x2=120, y2=44
    Type: -120
    Info: 'New  data type:'
  3:
    Bounds: x1=125, y1=28, x2=238, y2=44
    Type: 16
    Info: ''
  4:
    Bounds: x1=181, y1=77, x2=243, y2=113
    Type: -128
    Info: ''

DITL_1006_Document info data Types.txt
Items: (10 entries)
  0:
    Bounds: x1=348, y1=138, x2=398, y2=158
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=254, y1=138, x2=304, y2=158
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=25, y1=25, x2=217, y2=125
    Type: 0
    Info: ''
  3:
    Bounds: x1=27, y1=138, x2=87, y2=158
    Type: 4
    Info: 'Add...'
  4:
    Bounds: x1=254, y1=25, x2=343, y2=45
    Type: 4
    Info: 'Load set...'
  5:
    Bounds: x1=254, y1=85, x2=343, y2=105
    Type: 4
    Info: 'Save set...'
  6:
    Bounds: x1=157, y1=138, x2=215, y2=158
    Type: 4
    Info: 'Remove'
  7:
    Bounds: x1=342, y1=130, x2=404, y2=166
    Type: -128
    Info: ''
  8:
    Bounds: x1=254, y1=55, x2=343, y2=75
    Type: 4
    Info: 'Append set...'
  9:
    Bounds: x1=0, y1=0, x2=0, y2=0
    Type: 1
    Info: ' î'

DITL_1005_Get C++ Files to parse.txt
Items: (14 entries)
  0:
    Bounds: x1=256, y1=207, x2=336, y2=225
    Type: 4
    Info: 'Add'
  1:
    Bounds: x1=59, y1=1152, x2=77, y2=1232
    Type: 4
    Info: ''
  2:
    Bounds: x1=256, y1=163, x2=336, y2=181
    Type: 4
    Info: 'Cancel'
  3:
    Bounds: x1=232, y1=39, x2=347, y2=59
    Type: -128
    Info: ''
  4:
    Bounds: x1=256, y1=68, x2=336, y2=86
    Type: 4
    Info: 'Eject'
  5:
    Bounds: x1=256, y1=93, x2=336, y2=111
    Type: 4
    Info: 'Drive'
  6:
    Bounds: x1=12, y1=39, x2=230, y2=185
    Type: 0
    Info: ''
  7:
    Bounds: x1=229, y1=39, x2=246, y2=185
    Type: 0
    Info: ''
  8:
    Bounds: x1=252, y1=124, x2=340, y2=125
    Type: -128
    Info: ''
  9:
    Bounds: x1=20, y1=1044, x2=116, y2=1145
    Type: -120
    Info: ''
  10:
    Bounds: x1=12, y1=202, x2=231, y2=289
    Type: -128
    Info: ''
  11:
    Bounds: x1=256, y1=138, x2=336, y2=156
    Type: 4
    Info: 'Done'
  12:
    Bounds: x1=256, y1=267, x2=336, y2=285
    Type: 4
    Info: 'Remove'
  13:
    Bounds: x1=256, y1=232, x2=336, y2=250
    Type: 4
    Info: 'Add all'

DITL_1004_Get Template Files.txt
Items: (13 entries)
  0:
    Bounds: x1=256, y1=216, x2=336, y2=234
    Type: 4
    Info: 'Add'
  1:
    Bounds: x1=59, y1=1152, x2=77, y2=1232
    Type: 4
    Info: ''
  2:
    Bounds: x1=256, y1=163, x2=336, y2=181
    Type: 4
    Info: 'Cancel'
  3:
    Bounds: x1=232, y1=39, x2=347, y2=59
    Type: -128
    Info: ''
  4:
    Bounds: x1=256, y1=68, x2=336, y2=86
    Type: 4
    Info: 'Eject'
  5:
    Bounds: x1=256, y1=93, x2=336, y2=111
    Type: 4
    Info: 'Drive'
  6:
    Bounds: x1=12, y1=39, x2=230, y2=185
    Type: 0
    Info: ''
  7:
    Bounds: x1=229, y1=39, x2=246, y2=185
    Type: 0
    Info: ''
  8:
    Bounds: x1=252, y1=124, x2=340, y2=125
    Type: -128
    Info: ''
  9:
    Bounds: x1=20, y1=1044, x2=116, y2=1145
    Type: -120
    Info: ''
  10:
    Bounds: x1=12, y1=202, x2=230, y2=280
    Type: -128
    Info: ''
  11:
    Bounds: x1=256, y1=138, x2=336, y2=156
    Type: 4
    Info: 'Done'
  12:
    Bounds: x1=256, y1=241, x2=336, y2=259
    Type: 4
    Info: 'Remove'

DITL_1003_Help.txt
Items: (7 entries)
  0:
    Bounds: x1=275, y1=349, x2=325, y2=369
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=10, y1=28, x2=590, y2=336
    Type: -128
    Info: ''
  2:
    Bounds: x1=-77, y1=-245, x2=-19, y2=-225
    Type: -124
    Info: 'Button'
  3:
    Bounds: x1=230, y1=6, x2=361, y2=22
    Type: 0
    Info: ''
  4:
    Bounds: x1=266, y1=6, x2=325, y2=22
    Type: -120
    Info: 'Sections'
  5:
    Bounds: x1=338, y1=10, x2=351, y2=18
    Type: -64
    Info: ' €'
  6:
    Bounds: x1=269, y1=341, x2=331, y2=377
    Type: -128
    Info: ''

DITL_1001_Align dialog.txt
Items: (17 entries)
  0:
    Bounds: x1=20, y1=155, x2=107, y2=175
    Type: 4
    Info: 'Cancel'
  1:
    Bounds: x1=249, y1=155, x2=319, y2=175
    Type: 4
    Info: 'OK'
  2:
    Bounds: x1=31, y1=7, x2=182, y2=23
    Type: -120
    Info: 'Align selected objects'
  3:
    Bounds: x1=31, y1=64, x2=83, y2=82
    Type: 6
    Info: 'Left'
  4:
    Bounds: x1=31, y1=81, x2=97, y2=99
    Type: 6
    Info: 'Center'
  5:
    Bounds: x1=31, y1=98, x2=92, y2=116
    Type: 6
    Info: 'Right'
  6:
    Bounds: x1=31, y1=115, x2=84, y2=133
    Type: 6
    Info: 'As-is'
  7:
    Bounds: x1=198, y1=64, x2=250, y2=82
    Type: 6
    Info: 'Top'
  8:
    Bounds: x1=198, y1=81, x2=264, y2=99
    Type: 6
    Info: 'Center'
  9:
    Bounds: x1=198, y1=98, x2=266, y2=116
    Type: 6
    Info: 'Bottom'
  10:
    Bounds: x1=198, y1=115, x2=251, y2=133
    Type: 6
    Info: 'As-is'
  11:
    Bounds: x1=24, y1=27, x2=315, y2=29
    Type: -128
    Info: ''
  12:
    Bounds: x1=20, y1=47, x2=152, y2=141
    Type: -128
    Info: ''
  13:
    Bounds: x1=187, y1=47, x2=319, y2=141
    Type: -128
    Info: ''
  14:
    Bounds: x1=31, y1=41, x2=106, y2=57
    Type: -120
    Info: 'Horizontal:'
  15:
    Bounds: x1=198, y1=41, x2=255, y2=57
    Type: -120
    Info: 'Vertical:'
  16:
    Bounds: x1=0, y1=0, x2=0, y2=0
    Type: 1
    Info: ' é'

DITL_999.txt
Items: (2 entries)
  0:
    Bounds: x1=164, y1=167, x2=222, y2=187
    Type: 4
    Info: 'Button'
  1:
    Bounds: x1=23, y1=21, x2=387, y2=149
    Type: -120
    Info: 'left = ^0 right = ^1 top = ^2 bottom = ^3'

DITL_186_Export page items (NavServices).txt
Items: (2 entries)
  0:
    Bounds: x1=13, y1=7, x2=243, y2=26
    Type: 7
    Info: 'è'
  1:
    Bounds: x1=13, y1=36, x2=243, y2=55
    Type: 7
    Info: 'é'

DITL_185_Been using not registered CodeRetriever.txt
Items: (2 entries)
  0:
    Bounds: x1=124, y1=78, x2=324, y2=98
    Type: 4
    Info: 'OK, I'll call Kagi at once.'
  1:
    Bounds: x1=87, y1=13, x2=353, y2=64
    Type: -120
    Info: 'You have been using CodeRetriever. Please note that you may only use it on a trial basis up to 30 days.'

DITL_184_Add_Remove Items (NavServices).txt
Items: (7 entries)
  0:
    Bounds: x1=12, y1=9, x2=261, y2=25
    Type: -120
    Info: 'Select files to import:'
  1:
    Bounds: x1=12, y1=29, x2=286, y2=166
    Type: -128
    Info: ''
  2:
    Bounds: x1=300, y1=32, x2=388, y2=52
    Type: 4
    Info: 'Add'
  3:
    Bounds: x1=300, y1=88, x2=388, y2=108
    Type: 4
    Info: 'Remove'
  4:
    Bounds: x1=300, y1=112, x2=388, y2=132
    Type: 4
    Info: 'Remove All'
  5:
    Bounds: x1=300, y1=143, x2=388, y2=163
    Type: 4
    Info: 'Done'
  6:
    Bounds: x1=300, y1=56, x2=388, y2=76
    Type: 4
    Info: 'Add All'

DITL_183_Fix file problem 6.txt
Items: (4 entries)
  0:
    Bounds: x1=295, y1=110, x2=353, y2=130
    Type: 4
    Info: 'Fix'
  1:
    Bounds: x1=87, y1=110, x2=145, y2=130
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=87, y1=10, x2=353, y2=101
    Type: -120
    Info: 'Object Plant has detected an error in the "^0" page. There is an invalid class which should be removed.You should choose to fix this.'
  3:
    Bounds: x1=205, y1=110, x2=263, y2=130
    Type: 4
    Info: 'Fix all'

DITL_182_C++ syntax error.txt
Items: (2 entries)
  0:
    Bounds: x1=156, y1=88, x2=214, y2=108
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=87, y1=12, x2=353, y2=81
    Type: -120
    Info: 'Syntax error:^0: "^2" at line ^1 in file "^3".'

DITL_181_Parsing aborted.txt
Items: (2 entries)
  0:
    Bounds: x1=120, y1=88, x2=178, y2=108
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=87, y1=20, x2=252, y2=55
    Type: -120
    Info: 'Parsing aborted!'

DITL_180_C++ parsing error.txt
Items: (2 entries)
  0:
    Bounds: x1=156, y1=88, x2=214, y2=108
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=87, y1=12, x2=353, y2=81
    Type: -120
    Info: 'Parsing error:^0^1^2^3'

DITL_179_Code generation error.txt
Items: (2 entries)
  0:
    Bounds: x1=156, y1=88, x2=214, y2=108
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=87, y1=12, x2=353, y2=81
    Type: -120
    Info: 'Code generation error:^0 ^1 ^2 ^3'

DITL_178_Template file user code error.txt
Items: (2 entries)
  0:
    Bounds: x1=156, y1=88, x2=214, y2=108
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=87, y1=12, x2=353, y2=81
    Type: -120
    Info: 'Template syntax error:^0 in file "^1".'

DITL_177_Ref not listed in original.txt
Items: (4 entries)
  0:
    Bounds: x1=295, y1=110, x2=353, y2=130
    Type: 4
    Info: 'Fix'
  1:
    Bounds: x1=87, y1=110, x2=145, y2=130
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=87, y1=10, x2=353, y2=101
    Type: -120
    Info: 'Object Plant has detected an error in the file. The reference ^0 "^1" is not listed in the original ^0.You should choose to fix this.'
  3:
    Bounds: x1=205, y1=110, x2=263, y2=130
    Type: 4
    Info: 'Fix all'

DITL_176_MClass in two pages.txt
Items: (4 entries)
  0:
    Bounds: x1=295, y1=110, x2=353, y2=130
    Type: 4
    Info: 'Fix'
  1:
    Bounds: x1=87, y1=110, x2=145, y2=130
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=87, y1=10, x2=353, y2=101
    Type: -120
    Info: 'Object Plant has detected an error in the file. ^0 "^1" is listed in both the "^2" page and the "^3" page.You should choose to fix this.'
  3:
    Bounds: x1=205, y1=110, x2=263, y2=130
    Type: 4
    Info: 'Fix all'

DITL_175_Old file cannot be opened.txt
Items: (2 entries)
  0:
    Bounds: x1=167, y1=104, x2=237, y2=124
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=74, y1=12, x2=388, y2=82
    Type: -120
    Info: 'The file "^0" cannot be opened. Perhaps it is already open in another application. Close the file and try again.'

DITL_174_Fix file problem 5.txt
Items: (4 entries)
  0:
    Bounds: x1=295, y1=110, x2=353, y2=130
    Type: 4
    Info: 'Fix'
  1:
    Bounds: x1=87, y1=110, x2=145, y2=130
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=87, y1=10, x2=353, y2=101
    Type: -120
    Info: 'Object Plant has detected an error in the file. The "^0" class has an invalid association.You should choose to fix this.'
  3:
    Bounds: x1=205, y1=110, x2=263, y2=130
    Type: 4
    Info: 'Fix all'

DITL_173_Fix file problem 4.txt
Items: (4 entries)
  0:
    Bounds: x1=295, y1=110, x2=353, y2=130
    Type: 4
    Info: 'Fix'
  1:
    Bounds: x1=87, y1=110, x2=145, y2=130
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=87, y1=10, x2=353, y2=101
    Type: -120
    Info: 'Object Plant has detected an error in the file. An event between state "^0" and state "^1" is inconsistent.You should choose to fix this.'
  3:
    Bounds: x1=205, y1=110, x2=263, y2=130
    Type: 4
    Info: 'Fix all'

DITL_172_Fix file problem 3.txt
Items: (4 entries)
  0:
    Bounds: x1=295, y1=110, x2=353, y2=130
    Type: 4
    Info: 'Fix'
  1:
    Bounds: x1=87, y1=110, x2=145, y2=130
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=87, y1=10, x2=353, y2=101
    Type: -120
    Info: 'Object Plant has detected an error in the file. Class "^0" has a dangling association.You should choose to fix this.'
  3:
    Bounds: x1=205, y1=110, x2=263, y2=130
    Type: 4
    Info: 'Fix all'

DITL_171_Subpage of class with ref.txt
Items: (2 entries)
  0:
    Bounds: x1=148, y1=89, x2=206, y2=109
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=87, y1=10, x2=336, y2=58
    Type: -120
    Info: 'You cannot make a subsystem of a class that has references.'

DITL_170_Fix file problem 2.txt
Items: (4 entries)
  0:
    Bounds: x1=295, y1=110, x2=353, y2=130
    Type: 4
    Info: 'Fix'
  1:
    Bounds: x1=87, y1=110, x2=145, y2=130
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=87, y1=10, x2=353, y2=101
    Type: -120
    Info: 'Object Plant has detected an error in the file. Class "^0" is only available in the "^1" model page but not the view page.You should choose to fix this.'
  3:
    Bounds: x1=205, y1=110, x2=263, y2=130
    Type: 4
    Info: 'Fix all'

DITL_169_Fix file problem.txt
Items: (4 entries)
  0:
    Bounds: x1=295, y1=110, x2=353, y2=130
    Type: 4
    Info: 'Fix'
  1:
    Bounds: x1=87, y1=110, x2=145, y2=130
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=87, y1=10, x2=353, y2=101
    Type: -120
    Info: 'Object Plant has detected an error in the file. ^0 "^1" is not listed in the "^2" page's record.You should choose to fix this.'
  3:
    Bounds: x1=205, y1=110, x2=263, y2=130
    Type: 4
    Info: 'Fix all'

DITL_168_Inheritance problem 2.txt
Items: (2 entries)
  0:
    Bounds: x1=111, y1=79, x2=169, y2=99
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=68, y1=9, x2=269, y2=51
    Type: -120
    Info: 'A class cannot inherit from an interface or vice versa.'

DITL_167_Template files not found.txt
Items: (2 entries)
  0:
    Bounds: x1=161, y1=103, x2=219, y2=123
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=85, y1=9, x2=359, y2=92
    Type: -120
    Info: 'The template file(s) specified in the Document Preferences dialog cannot be found. Please use the Document Preferences dialog to specify the template files.'

DITL_166_Too many classes.txt
Items: (2 entries)
  0:
    Bounds: x1=143, y1=69, x2=201, y2=89
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=68, y1=9, x2=325, y2=63
    Type: -120
    Info: 'You are not allowed to create more than ^0 with an unregistered copy.'

DITL_165_Not available function.txt
Items: (2 entries)
  0:
    Bounds: x1=143, y1=69, x2=201, y2=89
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=68, y1=9, x2=325, y2=51
    Type: -120
    Info: 'This function is only available to registered users.'

DITL_164_Change of notation.txt
Items: (2 entries)
  0:
    Bounds: x1=155, y1=92, x2=225, y2=112
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=74, y1=12, x2=365, y2=67
    Type: -120
    Info: 'You have changed the notation for this document. The change will be in effect the next time you open the document.'

DITL_163_Folder duplicate name.txt
Items: (2 entries)
  0:
    Bounds: x1=167, y1=133, x2=237, y2=153
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=74, y1=12, x2=388, y2=126
    Type: -120
    Info: 'There is a folder "^0" which has the same name as a file that is being generated. This conflict cannot be resolved by Object Plant. Please rename the class that generates the file "^1" or the page giving the folder its name.'

DITL_162_Delete of interface with refs.txt
Items: (3 entries)
  0:
    Bounds: x1=315, y1=79, x2=385, y2=99
    Type: 4
    Info: 'Delete'
  1:
    Bounds: x1=74, y1=79, x2=144, y2=99
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=74, y1=12, x2=388, y2=70
    Type: -120
    Info: 'The "^0" interface has reference interfaces. Do you really want to delete the interface and all of its references?'

DITL_161_No interface to refer to.txt
Items: (2 entries)
  0:
    Bounds: x1=128, y1=76, x2=186, y2=96
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=65, y1=11, x2=303, y2=63
    Type: -120
    Info: 'You cannot create a interface reference when there are no interfaces.'

DITL_160_Delete of class with refs.txt
Items: (3 entries)
  0:
    Bounds: x1=315, y1=79, x2=385, y2=99
    Type: 4
    Info: 'Delete'
  1:
    Bounds: x1=74, y1=79, x2=144, y2=99
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=74, y1=12, x2=388, y2=70
    Type: -120
    Info: 'The "^0" class has reference classes. Do you really want to delete the class and all of its references?'

DITL_159_No class to refer to.txt
Items: (2 entries)
  0:
    Bounds: x1=128, y1=76, x2=186, y2=96
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=65, y1=11, x2=304, y2=62
    Type: -120
    Info: 'You cannot create a class reference when there are no classes.'

DITL_158_Interface problem.txt
Items: (2 entries)
  0:
    Bounds: x1=128, y1=79, x2=186, y2=99
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=68, y1=9, x2=300, y2=47
    Type: -120
    Info: 'A supplier line must start from a class and end in an interface box.'

DITL_157_No template files.txt
Items: (2 entries)
  0:
    Bounds: x1=161, y1=83, x2=219, y2=103
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=85, y1=9, x2=360, y2=63
    Type: -120
    Info: 'No template files have been selected in the Document Preferences->General dialog hence no code will be generated.'

DITL_156_Template file younger than generate.txt
Items: (4 entries)
  0:
    Bounds: x1=350, y1=98, x2=416, y2=118
    Type: 4
    Info: 'Continue'
  1:
    Bounds: x1=30, y1=98, x2=88, y2=118
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=85, y1=9, x2=428, y2=84
    Type: -120
    Info: 'The template file "^0" seems to have been modified after the last generation of the "^1" file. Regenerating the file could cause loss of your own code.'
  3:
    Bounds: x1=227, y1=98, x2=317, y2=118
    Type: 4
    Info: 'Continue All'

DITL_155_Code generation aborted.txt
Items: (2 entries)
  0:
    Bounds: x1=120, y1=88, x2=178, y2=108
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=87, y1=20, x2=252, y2=55
    Type: -120
    Info: 'Generation aborted!'

DITL_154_Other copy on network.txt
Items: (2 entries)
  0:
    Bounds: x1=153, y1=77, x2=211, y2=97
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=87, y1=13, x2=353, y2=64
    Type: -120
    Info: 'There is already another copy of Object Plant running on this network with the same registration number.'

DITL_153_Template file syntax error.txt
Items: (2 entries)
  0:
    Bounds: x1=156, y1=88, x2=214, y2=108
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=87, y1=12, x2=353, y2=81
    Type: -120
    Info: 'Template syntax error:^0: "^2" at line ^1 in file "^3".'

DITL_152_Inheritance problem.txt
Items: (2 entries)
  0:
    Bounds: x1=111, y1=79, x2=169, y2=99
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=68, y1=9, x2=269, y2=51
    Type: -120
    Info: '^0 cannot inherit itself.'

DITL_151_Only one Initial and Final state allowed.txt
Items: (2 entries)
  0:
    Bounds: x1=143, y1=94, x2=201, y2=114
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=68, y1=9, x2=335, y2=89
    Type: -120
    Info: 'You can only have one ^0 state in a state diagram.(If you don't have any ^0 state in the diagram try to clear the undo buffer by adding a note and immediately delete it.)'

DITL_150_Duplicate data type.txt
Items: (2 entries)
  0:
    Bounds: x1=143, y1=79, x2=201, y2=99
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=82, y1=9, x2=318, y2=48
    Type: -120
    Info: 'The "^0" data type does already exist.'

DITL_149_interaction path problem.txt
Items: (2 entries)
  0:
    Bounds: x1=143, y1=79, x2=201, y2=99
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=82, y1=9, x2=318, y2=58
    Type: -120
    Info: 'An event interaction between boxes must be a straight horizontal line.'

DITL_148_Cannot write license code.txt
Items: (2 entries)
  0:
    Bounds: x1=171, y1=94, x2=229, y2=114
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=87, y1=10, x2=361, y2=77
    Type: -120
    Info: 'The license code information cannot be saved because the Object Plant application file is locked. Unlock the file and restart Object Plant.'

DITL_147_All windows closed.txt
Items: (3 entries)
  0:
    Bounds: x1=260, y1=80, x2=380, y2=100
    Type: 4
    Info: 'Close document'
  1:
    Bounds: x1=74, y1=80, x2=154, y2=100
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=74, y1=12, x2=388, y2=51
    Type: -120
    Info: 'You have closed the three main windows. Do you also want to close the document?'

DITL_146_Read error.txt
Items: (2 entries)
  0:
    Bounds: x1=153, y1=77, x2=211, y2=97
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=87, y1=13, x2=353, y2=70
    Type: -120
    Info: 'An error has occured! The file cannot be opened because ^0^1'

DITL_145_Write error.txt
Items: (2 entries)
  0:
    Bounds: x1=153, y1=77, x2=211, y2=97
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=87, y1=13, x2=353, y2=70
    Type: -120
    Info: 'An error has occured! The ^2 file cannot be saved because ^0^1'

DITL_144_Old system 2.txt
Items: (2 entries)
  0:
    Bounds: x1=153, y1=77, x2=211, y2=97
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=87, y1=13, x2=353, y2=64
    Type: -120
    Info: 'Your System does not support pop-up menus which is required to run the Object Plant.'

DITL_143_Old system.txt
Items: (2 entries)
  0:
    Bounds: x1=153, y1=77, x2=211, y2=97
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=87, y1=13, x2=353, y2=51
    Type: -120
    Info: 'You must use System 7.5 or later to run Object Plant.'

DITL_142_Wrong file type.txt
Items: (2 entries)
  0:
    Bounds: x1=156, y1=77, x2=214, y2=97
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=87, y1=10, x2=353, y2=64
    Type: -120
    Info: 'Object Plant can only open ordinary Object Plant documents. This file is of some other type. Sorry.'

DITL_141_Something wrong with file.txt
Items: (2 entries)
  0:
    Bounds: x1=156, y1=77, x2=214, y2=97
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=87, y1=13, x2=353, y2=35
    Type: -120
    Info: 'Object Plant cannot open this file.'

DITL_140_Old preferences file.txt
Items: (3 entries)
  0:
    Bounds: x1=87, y1=77, x2=145, y2=97
    Type: 4
    Info: 'Cancel'
  1:
    Bounds: x1=295, y1=77, x2=353, y2=97
    Type: 4
    Info: 'OK'
  2:
    Bounds: x1=87, y1=10, x2=353, y2=64
    Type: -120
    Info: 'Your preferences file seems to be old. A new one will be created based on your old settings.'

DITL_139_Delete of page.txt
Items: (3 entries)
  0:
    Bounds: x1=315, y1=79, x2=385, y2=99
    Type: 4
    Info: 'Delete'
  1:
    Bounds: x1=74, y1=79, x2=144, y2=99
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=74, y1=12, x2=388, y2=68
    Type: -120
    Info: 'Do you really want to delete this page and all of its possible subsystems? You cannot undo this operation.'

DITL_138_Delete of nested class.txt
Items: (3 entries)
  0:
    Bounds: x1=315, y1=79, x2=385, y2=99
    Type: 4
    Info: 'Delete'
  1:
    Bounds: x1=74, y1=79, x2=144, y2=99
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=74, y1=12, x2=388, y2=70
    Type: -120
    Info: 'The "^1" ^0 is a subsystem. Do you really want to delete the ^0 and all of its subsystems? You cannot undo this operation.'

DITL_137_Splash screen.txt
Items: (1 entries)
  0:
    Bounds: x1=0, y1=0, x2=400, y2=192
    Type: -64
    Info: ' ƒ'

DITL_136_Debug.txt
Items: (2 entries)
  0:
    Bounds: x1=88, y1=168, x2=146, y2=188
    Type: 4
    Info: 'Button'
  1:
    Bounds: x1=8, y1=6, x2=238, y2=163
    Type: -120
    Info: 'arg0: ^0arg1: ^1arg2: ^2arg3: ^3'

DITL_135_Bad preferences file.txt
Items: (3 entries)
  0:
    Bounds: x1=87, y1=77, x2=145, y2=97
    Type: 4
    Info: 'Cancel'
  1:
    Bounds: x1=295, y1=77, x2=353, y2=97
    Type: 4
    Info: 'OK'
  2:
    Bounds: x1=87, y1=10, x2=353, y2=64
    Type: -120
    Info: 'Your preferences file seems to be corrupt (or old). A new one will be created with default settings.'

DITL_134_Can only open one file.txt
Items: (2 entries)
  0:
    Bounds: x1=156, y1=77, x2=214, y2=97
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=87, y1=10, x2=353, y2=64
    Type: -120
    Info: 'Object Plant allows you only to open one file at the time. The first file you selected will be opened.'

DITL_133_File version conversion.txt
Items: (2 entries)
  0:
    Bounds: x1=156, y1=93, x2=214, y2=113
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=87, y1=10, x2=353, y2=77
    Type: -120
    Info: 'This file has been created with an older version of Object Plant. The file will be converted to the new format next time you save it.'

DITL_132_File version error.txt
Items: (2 entries)
  0:
    Bounds: x1=156, y1=88, x2=214, y2=108
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=87, y1=12, x2=353, y2=62
    Type: -120
    Info: 'This file has been created with a very old (or new) version of Object Plant hence it cannot be read. Sorry...'

DITL_131_About box.txt
Items: (6 entries)
  0:
    Bounds: x1=288, y1=211, x2=346, y2=231
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=13, y1=12, x2=413, y2=204
    Type: -64
    Info: ' ƒ'
  2:
    Bounds: x1=367, y1=211, x2=430, y2=227
    Type: -120
    Info: '^1'
  3:
    Bounds: x1=13, y1=212, x2=284, y2=229
    Type: -120
    Info: 'Registered to: ^0'
  4:
    Bounds: x1=20, y1=183, x2=145, y2=199
    Type: 64
    Info: ' ‚'
  5:
    Bounds: x1=185, y1=181, x2=350, y2=200
    Type: 0
    Info: ''

DITL_130_Association path problem.txt
Items: (2 entries)
  0:
    Bounds: x1=143, y1=79, x2=201, y2=99
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=68, y1=9, x2=325, y2=58
    Type: -120
    Info: 'Cannot find any nice path to connect the two ^0 with an association.Just making it a straight line...'

DITL_129_Save, Cancel, Don't Save.txt
Items: (4 entries)
  0:
    Bounds: x1=315, y1=80, x2=385, y2=100
    Type: 4
    Info: 'Save'
  1:
    Bounds: x1=232, y1=80, x2=302, y2=100
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=74, y1=80, x2=159, y2=100
    Type: 4
    Info: 'Don't save'
  3:
    Bounds: x1=74, y1=12, x2=388, y2=51
    Type: -120
    Info: 'Save changes to "^0" before closing?'

DITL_128_General error alert.txt
Items: (2 entries)
  0:
    Bounds: x1=198, y1=116, x2=259, y2=137
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=87, y1=10, x2=440, y2=105
    Type: -120
    Info: '^0 ^1 ^2 ^3'